When Sun Jan 27 12pm — 3pm
Where Metalworking Workshop
1825 Monetary Ln #104 Carrollton, TX 75006
What DMS's TIG welding class that introduces TIG welding using mild steel. This class certifies you use the TIG welder at DMS.
Host James Dowe
Categories
Tools

Registration

  • Cost: $30.00
  • Restrictions:
    • DMS members only
    • Ages 18+

Cancellations for this event must be made before January 27, 2019 — 12:00pm.

Register for this Event

4 spaces of 4 avaliable

About this Event

The class will cover:
* The basic setup and operation of the Lincoln Electric SQUARE WAVE® TIG 200 TIG
* Safety procedures for using a TIG welder
* Preparing material for TIG welding
* Tacking and basic welding skills

The goal of the class is for a person to come back and be able to use the skills they learned during the class to become more proficient at TIG welding

Class is limited to DMS Members, with a maximum of 4 participants.

NOTICE: The class will be starting at noon in the welding bay and will last the entire time, 3 hours. If you show up after the safety portion of the class has started you will not be able to attend and have to take the class at a different time

Cost of the class is $30.00. All proceeds go to DMS Metal shop for materials and supplies.

You will need to have taken the DMS Metal Shop safety class before using any equipment in the metal shop.

Special Considerations and Warnings

Please wear natural fiber clothing (cotton or denim material is preferable) with long sleeves and long pants without cuffs. Closed toes shoes are also required. Long hair needs to be secured or covered. If you have your own welding helmet, gloves and other safety equipment you can bring them but equipment will be provided.