When Sat Jul 21 7pm — 9pm
Where Lecture Hall
1825 Monetary Ln #104 Carrollton, TX 75006
What A very basic Raspberry Pi class, teaching the general layout and initial setup of a Raspberry Pi 3B/3B+
Host Stan Simmons
Categories

Registration

  • Cost: $5.00

Cancellations for this event must be made before July 21, 2018 — 7:00pm.

Register for this Event

About this Event

Very basic Raspberry Pi 3/3+ class. It will cover the main functional parts of the RPi3, what power supplies to get, hooking up a HDMI monitor keyboard and mouse, formatting and installing the Raspbian OS, initial setup and configuration, connecting to Ethernet or WiFi, browsing the internet, and a very short introduction to Libre Office. This will let you use the RPi3 as a useful workstation at home.

Also covered: the Official Raspberry Pi Case, the Raspberry Pi 7" touchscreen, the Raspberry Pi Touchscreen Case ane the SmartiPi adjustable case.

Tanner Electronics will have the basic kit available for ~$70
RPi3B+ is $40
Case is $10
PS is $5
16GB microSD is $14
If you want the 7" touchscreen and case, Tanner Electronics stocks a couple of those at $70 for the screen and $19 for the case. You'll want to grab those early if you want to get them from Tanner's.

Links to purchase other parts will be listed below shortly.

Special Considerations and Warnings

You will need a minimum of a Raspberry Pi 3B or 3B+, a 8 or 16GB (or larger) microSD card, and a power supply. There will be a few standard monitors/keyboards/mice available, but bring your own if you can.