When Mon Jul 17 7pm — 8:30pm
Where Digital Media Room
1825 Monetary Ln #104 Carrollton, TX 75006
What Scan a Face> Post Processing in Fusion 360 > Export Face.stl file > Import Face.stl to V-Carve > Create Tool Path Strategy > Cut Face model into wood on MultiCam.
Host Kee Fedak
Categories
Tools

Registration

  • Cost: Free

Cancellations for this event must be made before July 17, 2017 — 7:00pm.

Registration for the event is closed.

About this Event

Scan a Face> Post Processing in Fusion 360 > Export Face.stl file > Import Face.stl to V-Carve > Create Tool Path Strategy > Cut Face model into wood on MultiCam.

Remember this is not exclusively about scanning your face and cutting it out on the MultiCam or 3D Printing it. You can scan anything and do the same thing.

You’re thinking of taking some classes, but don’t know which ones.
You’ve taken some classes, but you don’t know what to do next.
You want to make something cool, but it just seems really complicated.
Not Anymore!
In this series of classes we will focus on process and workflow.
You don’t need to have taken any of the prerequisite tool classes to take this class.
You will learn how to chain together multiple tools and techniques to create cool stuff!
If you’ve taken all the tool classes to create these cool things, then you’ll be ready to go and make something cool.
If you haven’t taken any or all of the tool classes, you’ll know which one to take to make this cool project.

Be Inspired! Practice making the same thing or create something entirely new!

What these classes are and what they are not.
>These classes will not spend time on how to use the specific tool. You will need to take that class afterwards to learn how.
>With some limitations this class will demonstrate the tool and the software workflow to create the project.
>You will see an example of the final product, so that you know this is real.
>Some tools require training, like the NextEngine 3D scanner, MultiCam or 3D printer. You will need to take those classes.
>Some skill or knowledge of the software will need to be learned if you don’t know already how to use it. You will need to take the class to learn how to use it. We will not cover step by step instructions on how use or set up the MultiCam or 3D printers etc.
>These classes show step by step how to make the cool project.